Sharp UX-1300 User Manual

OPERATING THE ANSWERING MACHINE
Note: Playback will stop if you receive a call, lift the handset, press the STOP key,
or open the paper compartment cover.
Erasing received messages
It is important to erase received messages after you listen to them to ensure that
the memory does not become full. This is done as follows:
e Erasing general messages: To erase
all messages in the General Box,
DELETE press and hold down the DELETE key
for at least 2 seconds. If the General
Box has a passcode, press the
DELETE key and then enter the
passcode.
e Erasing personal messages: To
erase all messages in a personal box,
press the DELETE key (do not hold it
down), enter the number of the box,
and then enter its passcode (if it has
one).
Erasing a single message: To erase
only a single message, press the
DELETE key while the message is
being played.
Using the REC/MEMO key
Youcan use the REC/MEMO key to record telephone conversations and
messages for other users of the UX-1300/1400. These will be recorded in the
General Box, and played back together with any incoming messages in that box
when the PLAY/SKIP key is pressed.
e Recording messages: To record a
message, press the REC/MEMO key
for at least 1 second, and then pick up
the handset and speak into it. When
you have finished speaking, replace
the handset or press the STOP key.
USING THE ANSWERING MACHINE 4-3

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English