Sharp UX-1300 User Manual

You can call the UX-1300/1400 from any touch-tone telephone and play back your
messages using the remote commands. You can also use these commands to
change the reception mode and other settings.
le {=yeiye)(smerele(-Maleiinle\=ia
When you call the UX-1300/1400, you must enter the passcode for the box you
want to listen to, or a remote code number if the box does not have a passcode.
One remote code number can be programmed, and it is used to access all boxes
which do not have passcodes. This prevents unauthorized people from listening to
your messages. You can use any 3-digit number as the remote code number.
The remote code number has been set to "001" at the factory. If you want to
change it, press the panel keys as shown below.
1 Press the keys shown at left. "T.A.D.
ee SETTINGS’ will appear in the display.
2 Press the keys shown at left. "REMOTE
CODE" will appear in the display.
3 Enter a 3-digit number by pressing the
number keys.
(Example)
4 Press the START key and then the
STOP key.
USING THE ANSWERING MACHINE 4-5

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English