Sharp UX-1300

MAKING TELEPHONE CALLS
Using the HOLD/SEARCH key
You can use the HOLD/SEARCH key to search for a Rapid Key or Speed Dial
number. First search for the number as described in "Using the HOLD/SEARCH
key" in "Sending Documents” in this chapter, and then pick up the handset or press
the SPEAKER key. The number will be dialed automatically after you do so (do not
press the START key).
Redial
The last number called can be redialed by pressing the REDIAL key (it is not
necessary to pick up the handset or press the SPEAKER key). When the other
party answers, pick up the handset.
Hold
You can put the other party on hold during a conversation by pressing the
HOLD/SEARCH key. When this is done, they cannot hear you. You can put the
handset back in the cradle without breaking the connection. When you are ready to
speak with them again, pick up the handset. If you did not put the handset back in
the cradle, press the HOLD/SEARCH key one more time.
6-2 MAKING TELEPHONE CALLS