Sharp UX-1300 User Manual

CALLER ID
Dif ezorm Or-)
If desired, you can allow a designated phone number to access a personal box
directly when the answering machine is activated. In this case, when the caller
calls, he or she will immediately hear the outgoing message of the personal box
instead of that of the general box. You can designate one phone number for each
personal box.
Note: This function cannot be used if you are using Distinctive Ringing.
1 FUNCTION , — Press the keys shown at left. "DIRECT
CALL #" will appear in the display.
Press "1" to enter a number, or "2" to
clear a number. (If you pressed "2", go
to Step 5.)
Enter the number of the personal box to
(Example) be accessed directly.
Enter the phone number, including the
@) area code, by pressing the number keys
(Example) (the number must be 10 digits long).
Press the START key and then the
STOP key.
Preventing voice calls
With Caller ID tured on, you can use the Anti Junk Fax function described in the
following section to prevent voice calls as well as fax receptions (the Anti Junk Fax
function can normally only prevent faxes).
In this case, when a voice call or a fax transmission comes in from a number you
have specified as a "Junk Number", your fax will break the connection as soon as it
receives the calling phone number from the caller ID service (before the second
ring).
To use this function, set Option Setting 11 to YES as described in Chapter 8,
"Optional Settings", and then enter the number in the Anti Junk Number List as
described in "Anti Junk Fax" in the following section of this chapter.
Note: This function cannot be used if you are using Distinctive Ringing.
7-4 SPECIAL FUNCTIONS

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English