Sharp UX-1300 User Manual

Note: This section applies only to the UX-1300.
If you have a personal computer with a fax modem and fax software, you can
connect the computer to your fax with a regular telephone cord and set your fax to
PC Mode (PC mode is a special mode for operation with a computer). This will
allow you to use the fax as a simple scanner and printer. It is also the most
convenient setup if you want to use a computer for fax operations on the same
phone line as your fax machine.
Important:
To use your fax as a scanner, your fax software must have a manual reception function.
Connecting your fax to your computer
Plug one end of the telephone cord into your computer modem’s telephone line
jack (not the jack for an extension phone if it has one), and plug the other end into
the TEL. SET jack on your fax (not the TEL. LINE jack). If necessary, first remove
the seal covering the TEL. SET jack.
If your computer fax mo-
dem has an extension Modem
phone jack, you can con-
nect an extension phone ,
to it. Sel
fre | The TEL. LINE
<a jack should be
connected to the
wall jack.
Setting your fax to PC MODE
To use your fax as a printer or scanner, you must set it to PC MODE. We also
recommend that you keep the fax machine set to PC MODE if you will be
performing fax operations with your computer.
# To use PC MODE, your computer modem must be connected to your fax as
shown above.
1 FUNCTION To set the fax to PC Mode, press the
FUNCTION key and then the "#" key.
e "PC" will appear next to the time in the
display.
7-22 SPECIAL FUNCTIONS

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English