Connections
14
Attaching the tray extension and document support
Attach the paper tray extension.
♦ Pull the paper release plate forward. Insert the paper tray extension
horizontally into the notches in the paper tray. Rotate the paper tray
extension up until it snaps into place.
Attach the original document support.
Note: The original
document support
has a top side and a
bottom side. If you
cannot insert the
tabs on the support
into the holes, turn
the support over.
all.book Page 14 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
