Loading Printing Paper
23
1. Installation
Note: When receiving faxes or copying documents, do not allow a large
number of pages to accumulate in the output tray. This may obstruct the
outlet and cause paper jams.
4
Push the paper release plate back
down.
• If the paper release plate is not
pushed down, paper feed errors will
result.
5
If the display shows the following
alternating messages, press the
START/MEMORY key. (If not, go
directly to Step 6.)
SET PAPER &
PRESS START KEY
START/MEMORY
6
The fax has been set at the factory to
scale the size of received faxes to
letter size paper. If you have loaded
legal paper, you must change the
paper size setting to legal. Press these
keys:
The display will show:
FUNCTION
6
PAPER SIZE SET
all.book Page 23 Wednesday, April 26, 2000 7:08 PM
To Next Page
Loading...
Need help?
General
