3
Introduction
Note:
This fascismile machine is Year 2000 compliant.
*Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Automatic dialling
Rapid Key Dialling: 5 numbers
Speed Dialling: 35 numbers
Fax (thermal) paper
Initial starter roll (included with machine):
10 m
Recommended replacement roll:
FO-20PR6, 30 m
Paper cutting method UX-40:
Tear off by hand
UX-60:
Automatic cutter
Modem speed
9600 bps with automatic fallback to lower
speeds.
Transmission time*
Approx. 15 seconds
Resolution Horizontal:
8 pels/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Automatic document
feeder
5 pages max. (80 g/m
2
paper)
Haftone (grayscale)
64 levels
Welcome, and thank you for
choosing a Sharp facsimile
machine! The features and
specifications of your new Sharp
fax are shown below.
all-ux40.book Page 3 Thursday, November 18, 1999 2:35 PM
To Next Page
Loading...
Need help?
General
