EasyManuals Logo

Sharp UX-40 User Manual

Sharp UX-40
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Problems and Solutions
93
10. Trouble-
shooting
General problems
Problem Solution
Nothing appears in the
display.
Make sure the power cord is properly plugged into
a power outlet.
Connect another electrical appliance to the outlet to
see if it has power.
The machine does not
respond when you press
any of its keys.
If a beep sound is not made when you press the
keys, unplug the power cord and then plug it in
again several seconds later.
Automatic document
feeding does not work for
transmission or copying.
Check the size and weight of the document (see
Transmittable Documents
in Chapter 2).
Voice calls taken on an
extension phone are
interrupted by the fax.
The fax may interrupt during a voice call if the
reception mode is set to A.M. To prevent
interruption on a tone dial extension phone, press
any three keys on the extension phone after
answering. (Note: Do not enter the code to activate
fax reception.)
No reception occurs when
polling is attempted.
Make sure you have not run out of paper.
Make sure the transmitting machine is in automatic
reception mode.
If the transmitting machine has polling security,
make sure that your fax number has been entered
both in your machine and in the transmitting
machine.
all-ux40.book Page 93 Thursday, November 18, 1999 2:35 PM

Other manuals for Sharp UX-40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp UX-40 and is the answer not in the manual?

Sharp UX-40 Specifications

General IconGeneral
BrandSharp
ModelUX-40
CategoryFax Machine
LanguageEnglish

Related product manuals