Sending a Fax by Automatic Dialling
48
Speed Dialling
Speed Dialling can be used to dial any number that has been stored for
Automatic Dialling.
1
Load the document(s).
The display will show:
2
Press the
SPEED DIAL
key and then
enter the Speed Dial number by
pressing the numeric keys.
•
To enter numbers 1 through 9, first
enter 0 and then the number.
(Example)
START
READY TO SEND
•
Set the resolution and/or contrast if
desired.
RESOLUTION/
RECEPTION MOD
3
Check the display. If the name or
number shown is correct, press the
START
key. (If not, press the
STOP
key and then repeat Step 2.)
SPEE
To Next Page
Loading...
Need help?
General
