Caller ID
75
7. Special
Functions
How Caller ID operates
When you receive a call, the name and/or phone number of the caller
will alternately appear in the display, beginning just before the second
ring. The information will continue to be displayed until the line is
disconnected.
Note:
At present most Caller-ID equipped telephone networks only
supply the caller’s number, therefore the caller’s name will only appear
providing that the caller’s name and number have been programmed into
memory.
DOE JOHN
Display example
525-8693
Caller’s name Caller’s number
Display messages
One of the following messages will appear while the fax rings if caller
information is not available.
NO SERVICE No caller information was received from
your telephone company. Make sure that the
telephone company has activated your
service.
CALLER-ID
ERROR
Noise on the telephone line prevented
reception of caller information.
WITHHELD Caller information was not provided by the
telephone company at the caller’s request.
all-ux40.book Page 75 Thursday, November 18, 1999 2:35 PM
To Next Page
Loading...
Need help?
General
