Caller ID
78
2
Press
1
to enter a number, or
2
to clear
a number. (If you pressed
2
, go to
Step 4.)
3
Enter the phone number, including the
area code, by pressing the number
keys (max. of 20 digits).
1
2
or
SET CLEAR
4
Press the
START
key and then the
STOP
key.
STOP
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in
Blocking Reception of Unwanted Faxes
in this chapter to
block voice calls as well as fax receptions (the Anti Junk Fax function
normally only blocks faxes).
In this case, when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will break
the connection as soon as it receives the calling phone number from
the caller ID service.
To use this function, enter the number in the Anti Junk Number List as
explained in
Blocking Reception of Unwanted Faxes
on the following
page.
Note:
This function cannot be used if you are using the Priority Call
function.
all-ux40.book Page 78 Thursday, November 18, 1999 2:35 PM
To Next Page
Loading...
Need help?
General
