Optional A.M. Mode Settings
72
Quiet Detect Start Time
This setting can be used to delay the start of the Quiet Detect Time
function. For example, if you want to insert a pause at the beginning
of your answering machine’s outgoing message to ensure clear
detection of fax signals, you can use this setting to delay the start of
silence detection so that the pause will not cause the fax to take over
the line.
Quiet Detect Start Timing has been turned off at the factory. If you
want to use this function, turn it on as explained below. As general
guide, the delay time should be slightly longer than the pause before
the outgoing message.
1
Press these keys:
2
Press a number from
00
to
15
.
FUNCTION
3
Press the
STOP
key to return to the
date and time display.
STOP
To Next Page
Loading...
Need help?
General
