Sharp UX-40

Setting the Date and Time
27
1. Installation
7
Enter a two-digit number for the hour
(“00” to “23”) and a two-digit number
for the minute (“00” to “59”).
Example: 9:25
4
Enter a two-digit number for the day
(“01” to “31”).
•
To correct a mistake, press the
SPEED DIAL
key to move the cursor
back to the mistake and then enter the
correct number.
5
Enter a two-digit number for the
month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
Example: the 5th
6
Enter the year (four digits).
Example: 2000
3
Press the
START
key.
•
The currently set date will appear in
the display.
START
0
1
0
5
9
0
5
2
0
2
0 0
all-ux40.book Page 27 Thursday, November 18, 1999 2:35 PM