Loading the Thermal Paper
14
4 Unwrap the roll of thermal paper and
place it in the compartment.
• Important: The roll must be placed so
that the leading edge of the paper
unrolls as shown. (The paper is only
coated on one side for printing. If the roll
is placed backwards, the paper will
come out blank after printing.)
5 Insert the leading edge of the paper
into the slot as shown. Continue to
push the paper through the slot until it
comes out the opening in the front of
the machine.
6 Make sure the paper comes out straight, and then flip down the paper
guide.
YES
NO!
UX-53
UX-73
all.bookPage14Monday,January23,20062:05PM
To Next Page
Loading...
Need help?
General
