Sharp UX-53

84
Quick Reference Guide
Sending Faxes
Place your
document (up to
10 pages) face
down in the
document feeder.
Normal Dialling
1. Lift the handset or press .
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start
key).
4. Press .
Rapid Key Dialling
Press the appropriate Rapid Key.
Transmission will begin automatically.
Speed Dialling
1. Press .
2. Enter the 2-digit Speed Dial number.
3. Press .
Direct Keypad Dialling
1. Dial the fax number.
2. Press .
Storing Auto Dial Numbers
1. Press , , , .
2. Enter a 2-digit Speed Dial number (any
number from (01 to 40).
3. Enter the fax number and press .
3
1
4. Enter a name by pressing number keys.
(To enter two letters in succession that
require the same key, press after
entering the first letter.)
5. Press and then .
Receiving Faxes
To set the reception mode, press ,
, and then
: TEL mode : FAX mode
: TEL/FAX mode : A.M. mode
TEL mode: Answer all calls (even faxes)
by picking up the handset. To begin fax
reception, press .
FAX mode: The fax machine automatically
answers and receives faxes.
TEL/FAX (T/F) mode: The fax machine
automatically answers and receives faxes.
Voice calls (including manually dialled fax
transmissions) are signalled by a special
ringing sound.
A.M. ( ) mode: Select this mode when
an answering machine is connected to the
fax and the answering machine is turned
on.
1
1
2
3
4
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
all.bookPage84Monday,January23,20062:05PM