Sending a Fax by Automatic Dialling
33
2. Sending
Faxes
7 Enter a name by pressing number keys for each letter as shown in the
chart below. Up to 10 characters can be entered. (If you do not wish to
enter a name, go directly to Step 8.)
♦ Example: SHARP = 77777 444 22 7777 77
♦ To enter two letters in succession that require the same key, press after
entering the first letter.
♦ To change case, press . To enter one of the following symbols, press
or repeatedly: . / ! " # $ % & ’ ( ) + + , - : ; < = > ? @ [ ¥ ] ^ _ ' { | }
) (
(Note: Characters particular to the selected display language will appear at
the end of the symbol list.)
8 Press .
9 Return to Step 4 to store another number, or press to return to the
date and time display.
Making changes
To make changes in a number previously stored, repeat the programming
procedure. Select the Rapid Key or Speed Dial number for which you want to
make changes in Step 4, and then change the number and/or name when
they appear in the display in Steps 5 and 7.
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
Note: The fax machine uses a lithium battery to keep automatic dialling
numbers and other programmed information in memory when the power is
turned off. Battery power is consumed primarily when the power is off. With the
power kept continuously off, the life of the battery is about 5 years. If the battery
dies, have your dealer or retailer replace it. Do not try to replace it yourself.
all.bookPage33Monday,January23,20062:05PM
To Next Page
Loading...
Need help?
General
