Sharp XE-A407

97
•AUTOkey
Report type
Key operation
•ROMversion
Report type
(For XE-A407)
Report type
(For XE-A43S)
EFTTestFunction
Use the following procedure to perform the EFT test function.
Procedure
1.
Press the
j
key and select the “6 PROGRAM MODE” and
press the
A
key. In the “PROGRAM MODE” window,
select “3 EFT TEST” and press the
A
key, The EFT
TEST window will appear.
2.
Press the
A
key to perform the test function.
NOTE
When the EFT terminal (CREDIT CARD terminal) is not connected, the EFT test function causes
an error.