Sharp XE-A507 - Entering Character Codes; Character Code Entry Procedure

44
9
PriortoProgramming
When you are in the PROGRAM mode, the keyboard layout will be set to one of the programming layouts as
shown below.
ProgrammingKeyboardLayout
HWD
: Used for programming characters. For more information about programming characters,
see the section “How to Program Alphanumeric Characters.”
Also the
D
key is used to delete the record item.
F I
: Used to move the cursor.
A
: Used to program each setting and to nalize programming.
7
: Used to cancel programming and to get back to the previous screen.
: Used to go back to the previous record, e.g., from the department 2 programming window
back to the department 1 programming window.
: Used to go to the next record, for example, in order to program unit prices for sequential
departments.
: Used to scroll the window to go to the next page.
: Used to scroll the window to go back to the previous page.
l
: Used to clear the last setting you have programmed or clear the error state.
P
: Used to toggle between two or more options.
;
:
Used to list those options which you can toggle by the
P
key.
Numeric keys : Used for entering gures.