Sharp XE-A507 - Tax Programming Setup; Tax Programming Options

78
DeviceCongurationProgramming
Use the following procedure to select a device conguration programming:
Procedure
1.
In the SETTING window, select “11 DEVICE CONFIG.”
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:
1 KEYBOARD
Keyboard
2 DISPLAY
Display
3 PRINTER
Printer
4 EFT
EFT
The following illustration shows those options included in this programming group.
11 DEVICE CONFIG 1 KEYBOARD
l
See “Keyboard” this page.
2 DISPLAY
l
See “Display” on page 79.
3 PRINTER
l
See “Printer” on page 79.
4 EFT
l
See “EFT” on page 79.

■
Keyboard
Procedure
Program each item as follows:
•BUFFERING(Usetheselectiveentry)
YES: Enables the buffering keyboard.
NO: Disables the buffering keyboard.
•TOUCHSOUND(Usetheselectiveentry)
YES: Set to sound
NO: Not to sound