32 | Page
OPERATION
Continued from the previous page.
The incubator is now ready for use.
• You may now Load Samples into the incubator. Please see page 40.
8.
Run the unit for at least 12 hours (for example, overnight) with
chamber doors closed prior to:
• Setting the Over Temperature Limit (next step).
• Loading samples.
This helps ensure a stable temperature environment.
9.
Perform the Set the Over Temperature Limit. procedure on
page 39.
• The incubator must be heated and stable at your
application temperature prior to performing this
procedure.
To Next Page
Loading...