10Installation manual – NewMotion Business Pro & Lite 2.1 / 2.2 - 091NMEN13
L1 L2 L3 L3 L1 L2 L2 L3 L1
Option 1 Option 2 Option 3
4
3 . 4 . 2 . Dynamic Power Sharing
The Business Line uses Dynamic Power Sharing to evenly distribute the energy consumption throughout the connected
charge points.
Dynamic Power Sharing sets a static maximum allowed current consumption for all the charge points within a group of
a Business Pro. It can be realised by connecting multiple charge points with Ethernet cables in a daisy chain or star
con guration. Every group of charge points consists of one Business Pro and up to 40 Business Lites, depending on
the con guration used.
See chapter 3 . 5 . Creating a project plan for more information.
The Business Pro & Lite charge points can use Dynamic Power Sharing to evenly distribute the energy consumption
throughout the connected charge points.
Dynamic Power Sharing sets a static maximum allowed current consumption per phase for all the charge points within
a group of a Business Pro.
It can be realised by creating a network con guration of multiple charge points with Ethernet cables in either a daisy
chain con guration, star con guration or a combination of the two.
Every group of charge points consists of one Business Pro and up to 40 Business Lites, depending on the con guration
used.
See chapter 3 . 5 . Creating a project plan for more information on network con guration.
3 . 4 . 3 . Dynamic Power Management for Business
Set a dynamic maximum current for all the charge points within a group of a Business Pro, by measuring the energy
consumption of the building.
The Business Pro & Lite charge points can be equipped with Dynamic Power Management for Business for optimal use
of the available power.
The EMpro power meter measures the entire energy consumption at the main grid connection and the Business Pro is
instructed what the maximum grid capacity is during the commissioning of the system.
The Business Pro aggregates all the charge points within the charge point network to make sure that the total energy
consumption does not exceed the grid capacity limit.
Dynamic Power Management for Business sets a dynamic maximum current for all the charge points within a group of a
Business Pro, by measuring the real-time energy consumption of the building and subtracting it with the total energy
consumption being used by the charge points.
It can be realised by creating a network con guration of multiple charge points with Ethernet cables in either a daisy
chain con guration, star con guration or a combination of the two.
Every group of charge points consists of one Business Pro and up to 40 Business Lites, depending on the con guration
used.
EN
To Next Page
Loading...
Need help?
General
