Shell NewMotion Home Advanced 2.1 User Manual

29Installation manual – NewMotion Home Advanced 2.1 / 2.2 - 071NMEN13
T
2 . Mount the current transformers around the phase wires of the main grid connection (see  gure 40 1).
3 . Insert the wires of the current transformers into the matching connectors on the bottom of the DPM module (see
 gure 40 2).
NOTICE Make sure to match L1, L2 and L3 of the grid connection with L1, L2 and L3 on the DPM module.
+ 5V GND
Y
4 . Insert the wires of the power supply into the connectors on the top of the DPM module (see  gure 41 1 ).
NOTICE Polarity is important! The wire with the broken white stripe is the power adapter GND and should be
connected to the GND pin (right) on the DPM module. The other wire is the + 5 V and should be connected to the +
5 V pin (left) on the DPM module. The middle pin is not used.
5 . Plug the power supply into a working Schuko power socket (see  gure 41 2 ) .
EN

Shell NewMotion Home Advanced 2.1 Specifications

General

Brand	Shell
Model	NewMotion Home Advanced 2.1
Category	Automobile Accessories
Language	English