40Installation manual – NewMotion Home Advanced 2.1 / 2.2 - 071NMEN13
8. Maintenance
8.1. Cleaning and sanitizing
It is advised to regularly clean the casing of the charge point using a simple damp cloth. Also, make sure no plants are
growing on or against the charge point.
• Do not use high pressure water hose to clean the product.
• Do not use aggressive cleaning agents to clean the product.
• Do not clean the inside of the product.
8.1. Periodic maintenance
Annually check:
• if all the screws and connectors are securely tightened on the components in the consumer unit. Check the
connectors of the MCB, RCD, RCBO, DPM module, etc.
• if all the screws are securely tightened on the components in the charge point. Check the connectors of the terminal
blocks, power meter, contactor, etc.
• if there are no bugs or plants inside the charge point. If this is the case, use a smaller coloured grommet for the
power cable or check if there is another possible way that the bugs have entered the charge point.
9. Disposal
Before disposing of the different materials, separate them into recyclables, normal waste and special waste.
Comply with local legal regulations and provisions when recycling or disposing of the product, the individual
components and the packaging.
A product marked with the WEEE symbol must be sent for separate collection of electrical and electronic devices.
EN
To Next Page
Loading...
Need help?
General
