Shibaura ST450 - Cast Iron Weights; Drawbars; 3-Point Hitch; Tires

 SECTION 4 – SPECIFICATIONS 
4-5
Model ST450 HST
(Hydro Static Transmission)
CAST IRON WEIGHTS
Front End: (5) weights @ 30 kg
(6) weights @ 30 kg with
optional weights bracket
Rear Wheel (per wheel) (4) weights @ 30 kg each
DRAWBARS
Extension / Clevis Standard
3-POINT HITCH
Category Type I
Position Control Type Mechanical
Draft Control Type Top Link Sensing (Optional)
Drop Rate Control Standard
Lift Capacity @ lower-link end 1,486 kg
@ 610mm (24") behind 1,059 kg
TIRES
FRONT:
AG: 8 – 16
Turf: 27 x 10.50 – 15
Large Turf (FD) 8 – 16
Industrial (R4) 10 – 16.5
REAR:
AG: 13.6 – 24
Turf: 475/65D20
Large Turf (FD) 13.6 – 28
Industrial (R4) 17.5L – 24
WHEEL BOLT TORQUES
Front Wheel-Disc-to-Hub:
FWD 175 N·m
Rear Wheel-
Disc-to-Axle 175 N·m
Disc-to-Rim 230 N·m
ROPS ATTACHING BOLT TORQUES
ROPS to Rear Axle 74 N·m
ROPS to
Lower and Center Frame
74 N·m