1-1
SECTION 1
GENERAL INFORMATION
AND SAFTY
GENERAL INFORMATION
PLEASE READ CAREFULLY:
For a complete list of the pre-delivery service
checks performed by your dealer, refer to the
DELIVERY REPORT check list found at the back
of this manual. Keep one copy as your record of
the service performed. The other should be
removed from the manual and kept by your
dealer. MAKE SURE THAT BOTH COPIES ARE
COMPLETED AND THAT YOU AND THE
DEALER SIGN BOTH COPIES.
A PRODUCT IDENTIFICATION PLATE (Figure
1-1) is located on the right-hand side of the front
frame (Figure 1-2). The numbers on the plate are
important should your tractor require future
service. For your convenience, have your dealer
record the numbers in the appropriate spaces
below.
SHIBAURA policy is one of continuous
improvement, and the right to change prices,
specification or equipment at any time without
notice is reserved.
All data given in this manual is subject to
production variations. Dimensions and weights
are approximate only and the illustrations do not
necessarily show tractors in standard condition.
For exact information about any particular tractor
please consult your SHIBAURA Tractor Dealer.
Figure 1-1
Figure 1-2
To Next Page
Loading...
