41
Introduction of Shihlin Inverter
Introduction of Inverter
3.5.4 Installation notice
1. Please install in an upright direction.
DANGER:Risk of injure and electric shock
10
Mount the inverter on a non combustible
surface
CAUTION:
Risk of fire
Read the manual and follow the safety
instructions before use
Isolate from supply and wait 10 minutes
before removing this cover
Ensure proper earth connection
2. Clear the surroundings when installing.
3. The ambient temperature shall not exceed the
permissible value.
4. Correct position for installing in a protection
cabin.
5. Do not install the inverter on a surface of inflammable material such as wood.
6. Do not install the inverter at place exposed to explosive gas or inflammable dust.
7. Do not install the inverter at place with airborne oil mist and dust.
8. Do not install the inverter at place exposed to corrosive gas and salt laden air.
9. Do not install the inverter in the environment of high temperature and high humidity.
10. Please refer to the installation method as follows.
10
c
m
10
c
m
Shihlin
Inverter
5
c
m
5
c
m
To Next Page
Loading...
Need help?
General
