05
Parameter Description
Parameter Description
5.9 Load pattern selection (P.14, P.98, P.99, P.162~P.169)
P.14 “Load pattern selection”
P.98 “Medium frequency 1”
P.99 “Voltage output at medium
frequency 1”
P.162 “Medium frequency 2”
P.163 “Voltage output at medium
frequency 2”
P.164 “Medium frequency 3”
P.165 “Voltage output at medium
frequency 3”
P.166 “Medium frequency 4”
P.167 “Voltage output at medium
frequency 4”
P.168 “Medium frequency 5”
P.169 “Voltage output at medium
frequency 5”
Parameter Factory Setting Setting Range Remarks
14 0 0~13 There are nine kinds of VF curve when P.14=4~13.
--- zH056~0 zH3 89
--- %001~0 %01 99
--- 9999 ,zH056~0 9999 261
--- %001~0 %0 361
---9999 ,zH056~0 9999 461
--- %001~0 %0 561
---9999 ,zH056~0 9999 661
--- %001~0 %0 761
---9999 ,zH056~0 9999 861
--- %001~0 %0 961
Time
P.13
ON
Start signal
Output
frequency
(Hz)
Related parameters
P. 46 “Second torque boost”
P.80~P.84 , P. 86
“Multi -function terminals selection ”
P. 0 “Torque boost”
To Next Page
Loading...
Need help?
General
