Shimadzu GC-2010 User Manual

3 Basic Operation
3.7 Setting the Detector Temperature
21FPD-2010
To set the temperature of the FPD detector, select the detector screen using the [DET] key and set the
detector temperature. Set the detector temperature around 30
°C higher than the column oven temperature
in order to prevent the detector from getting soiled. If components with high boiling point are contained, set
the temperature higher.
Fig. 3.7.2

Shimadzu GC-2010 Specifications

General

Brand	Shimadzu
Model	GC-2010
Category	Security Sensors
Language	English