7.1
7.7.
77FPD-2010
7 Maintenance Parts
7.1Maintenance Parts List
Part name Part No. Remarks
Silicon rubber septum(20pcs) 201-35584 Injection port septum (for general use)
High temperature septum(20pcs) 201-43898 Injection port septum (for heat resistance)
Glass insert (for split) 221-41444-01 For split sample introduction method
Glass insert (for splitless) 221-48335-01 For splitless sample introduction method
Silica wool (2grams) 221-48600 Stuffing of glass insert
Fluoride rubber O-ring (5pcs) 036-11203-84 For mounting glass insert
Graphite ferrule, 0.5 mm (10pcs) 221-32126-05 For mounting capillary column
Graphite ferrule, 0.8 mm (10pcs) 221-32126-08 For mounting wide bore column
Aluminum gaskets 201-35183 Packing of pipe connection portion
Quartz tube, nozzle base 221-48423-91 FPD nozzle base unit
Quartz cylinder 221-46552 FPD detector
Optional filter (for S) 221-46310-01 FPD detector
Optional filter (for P) 221-46310-02 FPD detector
Optional filter (for Sn) 221-46310-03 FPD detector
Photomultiplier 221-48578 FPD detector
Battery (One AAA dry cell battery) 074-70020-03 For backup
Shield ring 221-45657-01 For cutting FPD noise
Filament 221-73430-82 Igniter
Lens 221-48575 FPD detector
O-ring S18 036-19006-14 For filter inside
O-ring S22.4 036-19006-17 For filter outside
O-ring P18 036-11018 For photomultiplier opening
O-ring P28 036-11029 For photomultiplier cover
O-ring P29 036-11031 For photomultiplier socket
O-ring P22 036-11022 For Lens
To Next Page
Loading...
