Shimadzu GC17A User Manual

Shimadzu GC17A/GC14C 4 Using the control module
4.1.2 Method Setup - GC - Inlet 1 (2)
Parameters of the Inlet may differ according to the inlet type. In some
cases (when the options selected are not supported by the connected
GC), the values will not be sent to the GC and null values will be get from
the GC.
Fig 8: Method Setup - GC Control - Inlet
Column parameters: Length, Diameter
Purge parameters: Press, Flow
SPL mode: is the same for both inlets
Pressure, Velocity, Col Flow:
Caution: Only one value will be sent to GC, select which one, the other values will be
calculated by the CG. When reading a method from the GC, all values will
be read.
Total Flow, Split Ratio:
Caution: Only one value will be sent to GC, select which one, the other values will be
calculated by CG. When reading a method from GC, all values will by
read.
- 9 -

Shimadzu GC17A Specifications

General

Brand	Shimadzu
Model	GC17A
Category	Laboratory Equipment
Language	English