Shimadzu GC17A User Manual

Shimadzu GC17A/GC14C 4 Using the control module
4 Using the control module
New GC tab appears in the Method Setup dialog, enabling the setting of
the GC control method.
Caution: If the module does not get the method file, for example after the
Instrument window opening or method file change, the Single Run
measurement will run with the old method loaded to the Shimadzu
GC17A/GC14C control module.
4.1 Method Setup - GC
4.1.1 Method Setup - GC - Oven/Zones
Fig 7: Method Setup - GC - Oven/Zones
Oven Parameters
Sets the Max Oven Temperature , Equilibry Time and the Oven
Temperature program.
Oven Max.
Possible values [0 - 470].
Equilibry Time
Time that the GC needs to reach the temperature equilibrium.
Gradient Table
Sets the Heat Rate, desired temperature (Final Temp.) and time to hold
this temperature (Hold Time). The Total Time column will be calculated
automatically.
Note: Maximum of 5 rows is available. Delete the value in Heat Rate column to
clear the selected row.
- 7 -

Shimadzu GC17A Specifications

General

Brand	Shimadzu
Model	GC17A
Category	Laboratory Equipment
Language	English