Shimano Steps E6000 Series - Unit Configuration

Cycle Computer Display and Setting
Changing the settings
45
Beep setting (Beep)
Configure the beep setting.
1
Press the Assist-Y or Assist-Z button to
move the cursor to the item you want to
configure.
Assist Shift
Item Details
ON Enable beeps by operation
OFF Disable beeps by operation
2
Pressing the Assist-X button enables the
set value at the cursor position and takes
you back to the "Setting menu" screen.
Assist Shift
Backlight setting (Backlight)
Configure the backlight setting.
1
Assist Shift
Press the Assist-Y or Assist-Z button to
move the cursor to the item you want to
configure.
Item Details
ON Always turned on
OFF Always turned off
MANUAL
Turns on and off in
conjunction with the
battery-powered light
2
Pressing the Assist-X button enables the
set value and takes you back to the
"Setting menu" screen.
Assist Shift