Shimano Steps E6000 Series - Language Selection

Cycle Computer Display and Setting
Changing the settings
46
Start mode setting (Start mode)
Sets the start gear when using start mode function.
1
Press the Assist-Y or Assist-Z button to
move the cursor to the item you want to
configure.
Assist Shift
Item Details
OFF No setting
2 2-speed
3 3-speed
4 4-speed
5 5-speed
2
Pressing the Assist-X button enables the
set value at the cursor position and takes
you back to the "Setting menu" screen.
Assist Shift
Clock setting (Clock)
Configure the clock setting.
1
Assist Shift
Press the Assist-Y or Assist-Z button to
adjust the time.
Press Assist-Y to increase the time value.
Press Assist-Z to decrease the time value.
2
Assist Shift
Pressing the Assist-X button enables the
set value and moves you to the minutes
setting.
3
Press the Assist-Y or Assist-Z button to
set the minutes.
Assist AssistShift Shift
You can change the numbers quickly by
holding down the Assist-Y or Assist-Z button.
4
Pressing the Assist-X button enables the
set value and takes you back to the
"Setting menu" screen.