11
3.
Select your preferred assist mode.
The bicycle is equipped with either SC-E6100 or EW-EN100.
*
When the power is turned on, assist mode is set to [OFF].
*
To change to the [WALK] assist mode, it is
necessary to use the above assist switch.
Assist mode
display
LED1
Button
< SC-E6100 >
< EW-EN100 >
X
Y
OFF
Lit in light blue
Lit in green
Lit in yellow
OFF
[OFF]
[ECO]
[NORM]
[HIGH]
[OFF]
LED1 indications Assist mode
Button
[HIGH]
[NORM]
[ECO]
[OFF]
[WALK]
YX
Long press Y
Short press X
4.
Ride the bicycle.
Assist will start when you start pedaling.
CAUTION
SHIMANO STEPS supports various brake systems.
Before riding, please check the brake system of your bicycle and
how to operate it beforehand.
5.
Turn off the power.
To Next Page
Loading...
