41
Configurable items Details
X
[Clear]
Reset the traveling distance or
the setting values.
Y
[Clock] Set the current time.
[Start mode]
*1
Set the start gear.
[Backlight] Configure the display backlight.
[Brightness] Set the display brightness.
[Beep] Turning the beep sound ON/OFF.
[Unit] Select between km and miles.
[Language] Set the display language.
[Font color]
Select the display character color
between black and white.
[Adjust]
*2
Adjust the electronic gear
shifting unit
[Shift timing]
*2
Adjust the shift timing
[Shifting advice]
*2
Turning the shifting advice ON/OFF
[RD protection reset]
*3
Activating RD protection reset
[Display speed]
Adjusts the displayed speed to
match another device.
[Exit] Return to the main screen.
*
1 Only for electronic shifting with internal geared hub
*
2 Only for electronic shifting
*
3 Only for electronic shifting with rear derailleur
Launching (SC-E7000)
If assist switch is not connected, the setting menu cannot be displayed.
1.
Stop your bicycle.
2.
Perform the following to switch to the setting menu.
•
Ensure that [DST] is not being displayed on the
screen, and then hold Assist-A or the function
button until the screen switches to the setting
menu.
•
Hold down Assist-X and Assist-Y together until the
screen switches to the setting menu.
Function button
Assist
< Basic screen >
< Setting menu screen >
To Next Page
Loading...
