45
[Clock] Time setting
Sets the current time. First set "hour" then "minute."
In step 2 and 4 in below procedure, you can change the values quickly by holding down Assist-X or Assist-Y.
1.
Enter the [Clock] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Clock], then
press Assist-A or the function button.
2.
Press Assist-X or Assist-Y to adjust the time.
•
Press Assist-X to increase the value.
•
Press Assist-Y to decrease the value.
Assist
< SC-E6100 >
< SC-E7000 >
3.
Press Assist-A or the function button to confirm the
setting.
The cursor moves to minutes value.
Assist
Function button
< SC-E6100 >
< SC-E7000 >
To Next Page
Loading...
