38
Switching the travel data display (SC-E7000)
The type of displayed traveling data changes each time
you press the function button, beginning with [DST]. If
nothing is done within 60 seconds, the screen will
automatically switch back to displaying the current speed.
•
If using SW-E6010, control is also possible with Assist-A.
Function button
Assist
< Current speed display >
Display item Description
- Current speed
[DST] Traveling distance
[ODO] Cumulative distance
[RNG] Travelable distance *1*3
[TME] Travelable time *2
[AVG] Average speed *2
[MAX] Maximum speed *2
[CAD] Your crank rotation speed *2 *4
[CLK] Current time *2
[DST]
[CLK]
[ODO]
[CAD]
[RNG]
[MAX]
[TME]
[AVG]
Current speed
*1 When [RNG] is displayed, the battery level is not displayed. The traveling range should be used as a reference only.
*2 Optional item: You can configure the display settings in E-TUBE PROJECT. For details, refer to the "Connection and
communication with devices" section.
*3 When walk assistance is functioning, the on screen display [RNG] changes to [RNG ---].
*4 Cadence is only displayed when pedaling is assisted while using electronic gear shifting.
To Next Page
Loading...
