Cycle Computer Display and Setting
Basic screen display of the cycle computer
38
(A)
(D)
(B)
(C)
(E)
(F)
(A) Speed
Displays the current speed.
(B) Clock
Displays the current time.
(C) Speed unit display
You can switch between km/h and
mph.
(D) Battery level indicator
(E) Changing the assist mode display
(F) Gear and traveling data display
F
Assist Shift
Displays the sprocket position or
traveling data.
The type of traveling data displayed
changes each time you tap Assist-X.
(F) Gear and traveling data display
Display Details
Gear (displayed only
when motor unit is
connected.)
Start gear *4
(when setting start
mode)
Traveling distance
Cumulative distance
Maximum traveling
distance*1*3
Maximum traveling
distance
(optional)*2
Traveling time
(optional)*2
Average speed
(optional)*2
Maximum speed
(optional)*2
*1 The battery level in (D) and walk assistance
in (E) are not displayed when "RANGE" is
displayed. The traveling range should be
used as a reference only.
*2 Optional item: You can confi gure the
display settings in E-tube Project. For
details, refer to "Connection and
communication with the PC"-"Settings
customizable in E-tube Project".
*
3 When walk assistance is functioning,
the on screen display "RANGE"
changes to "RANGE ---".
*4 When start mode is functioning, the
starting gear position during automatic
shifting down function use is displayed.
To Next Page
Loading...
