9. You can continue programming or exit. To exit program mode, press
and hold the record/shift (14) button and tap the Add kill/Rec Exit (12)
button.
Notes:
Leave the blackout mode if the blackout LED is lit by tapping the blackout (26) button.
Be sure that you are on the right page by viewing the screen where it displays page A or page B.
This will enable 1-24 or 25-48 channel control.
If you just wish to create a static look (= scene), then you must create a chase composed of only
1 scene (step).
You can add up to 1000 scenes (steps) available in every chase.
To Next Page
Loading...
