Shure MXA310 - Page 59

Shure Incorporated
59/76
Get Channel Mute LED State
Command String:
< GET x CHAN_MUTE_STATUS_LED_STATE >
where x is the channel requested: 0:
all channels 1-4: individual channel
MXA310 Response:
< REP x CHAN_MUTE_STATUS_LED_STATE ON >
< REP x CHAN_MUTE_STATUS_LED_STATE OFF >
where x is the channel number: 1-4:
individual channel; ON = MUTED
OFF = UNMUTED
Get Device Mute LED State
Command String:
< GET DEV_MUTE_STATUS_LED_STATE >
MXA310 Response:
< REP DEV_MUTE_STATUS_LED_STATE ON >
< REP DEV_MUTE_STATUS_LED_STATE OFF >
ON = MUTED OFF = UNMUTED
Get Network Audio Device Name
Command String:
< GET NA_DEVICE_NAME >
MXA310 Response:
< REP NA_DEVICE_NAME {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy}
Where
{yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy}
is a text string. Most devices allow
device id to be up to 31characters.
Value is padded with spaces as
needed to ensure that 31 char are
always reported.
Get Network Audio Channel Name
Command String:
< GET xx NA_CHAN_NAME >
Where xx is channel number All
channels: 0 MXA310: 1-5, 5 being
automix channel
MXA310 Response:
< REP xx NA_CHAN_NAME {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy}
Where xx is channel number. Where
{yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy}
is 31 char channel name. Value is
padded with spaces as needed to
ensure that 31 char are always re
ported.