Shure MXA310 - Page 60

Shure Incorporated
60/76
Get Control Network MAC Address
Command String:
< GET CONTROL_MAC_ADDR >
MXA310 Response:
< REP CONTROL_ MAC_ADDR yy:yy:yy:yy:yy:yy >
Where yy:yy:yy:yy:yy:yy is a 17 char
literal string formatted as 6 octets,
each separated by a colon. Exam
ple: 00:0E:DD:FF:F1:63
Restore Default Settings (firmware > v2.0)
Command String:
< SET DEFAULT_SETTINGS >
Request the device to set itself to
default settings.
MXA310 Response:
< REP PRESET xx >
where xx = 00 if restore is success
ful
Get PEQ Filters (firmware > v2.0)
Command String:
< GET PEQ_FLTRxx >
where xx is the filter number 01-04:
individual filter
MXA310 Response:
< REP PEQ_FLTRxx ON >
< REP PEQ_FLTRxx OFF >
where xx is PEQ filter number PEQ
filter status: ON OFF
Set PEQ Filters (firmware > v2.0)
Command String:
< SET PEQ_FLTRxx ON >
< SET PEQ_FLTRxx OFF >
< SET PEQ_FLTRxx TOGGLE >
where xx is filter number PEQ filter
status:. ON OFF TOGGLE
MXA310 Response:
< REP PEQ_FLTRxx ON >
< REP PEQ_FLTRxx OFF >
where xx is PEQ filter number PEQ
filter status: ON OFF
Get Active Mic Channels