Shure ULX-D Quad - Locking Controls and Settings; Home Screen Display Options

Shure Incorporated
16/70
•
•
•
•
•
•
•
Locking Controls and Settings
Use the LOCK feature to prevent accidental or unauthorized changes to the hardware.
Receiver
Menu path: DEVICE UTILITIES > LOCK
Use the control wheel to select and lock any of the following receiver functions.
MENU: All menu paths are inaccessible
GAIN: Front panel gain button is disabled
POWER: Power switch is disabled
SCAN: Front panel SCAN button is disabled and prevents frequency changes due to group scans initiated by other ULXD
units
SYNC: Front panel SYNC button is disabled
Tip: To unlock, press EXIT, turn the control wheel to select UNLOCKED, and press ENTER to save.
Transmitter
Menu path: UTILITY > LOCK
Use the transmitter controls to select and lock any of the following transmitter functions.
MENU LOCK: All menu paths are inaccessible.
POWER LOCK: Power switch is disabled
Quick-Lock option: To turn on the transmitter with its power and menu navigation buttons locked, press and hold the ▲ but
ton during power-on until the locked message is displayed.
Tip: To unlock the MENU LOCK, press the ENTER button 4 times to pass through the following screens: UTILITY > LOCK >
MENU UNLOCK
To unlock the POWER LOCK, set the power switch to the off position, then press and hold the ▲ button while resetting the
power switch to the on position.
Home Screen Display Options
Receiver
The HOME INFO menu provides options to change the information shown on the receiver home screen:
DEVICE UTILITIES > HOME INFO
Use the control wheel to select one of the following screen displays.