Shure Incorporated
38/70
•
•
Switched Mode
Switched mode is typically used for single network installations of star or daisychained networks. Switched mode is recom
mended for installations that don't require Dante audio.
Network Characteristics:
Dante Audio and Shure Control are present on both the Primary and Secondary ports
The Dante IP address and the Shure Control IP address must be on the same subnet. The computer running WWB6 must
also be on this subnet.
Network Example (Dante Audio + WWB6)
① Computer
Connect the computer running the Dante controller and WWB6 to the Primary port.
② DHCP Server
To Next Page
Loading...
