SICE S 60 - DESCRIPTION OF THE TYRE CHANGER S60; Technical Specifications

User Manual S60 71
UK
DESCRIPTION OF THE TYRE CHANGER
S60
TheS60isanelectro-hydraulicallyoperatedtyrechanger,withexclusivetechnologies
patented by Constructor.
It works on any type of integral wheels (drop centre and with a side ring) with the
maximumdimensionsandweightsindicatedintheTECHNICALDATAparagraph.
The machine is solidly constructed and has relatively reduced dimensions in comparison
to its operative capacity. It holds the wheel in a vertical position and is activated by
the operator, who uses a special mobile control.
TECHNICAL DATA
S60
- Maximum width ............................................................................................ 2060mm
- Maximum length .......................................................................................... 2540mm
- Maximum height .......................................................................................... 1770mm
-Hydraulicgear ....................................................................................................... unit
-Hydraulicpumpmotor .......................................................................................4.8kW
- Machine weight .............................................................................................. 2200Kg
- Rim dimensions .................................................................................. from14”to60”
- Maximum wheel diameter ........................................................................... 3000mm
- Maximum wheel weight ................................................................................. 1900kg
- Maximum wheel width ................................................................................. 1800mm
- Oil tank capacity .................................................................................................. 35l.
- Oil type .......................................................................................................ARNICA68
- Noise level:
•A-weightedsoundpressurelevel(L
pa
)attheworkingposition...<70dB(A)
The noise levels indicated correspond to emission levels and do not necessarily
represent safe operating levels. Although there is a relationship between emission levels
and exposure levels, this cannot be used reliably to establish whether or not further
precautions are necessary. The factors which determine the level of exposure to which
the operator is subject to include the duration of the exposure, the characteristics of
the workplace, other sources of noise, etc. The permitted exposure levels may also
varyaccordingtothecountry.However,thisinformationwillenablemachineusersto
make a more accurate assessment of hazards and risks.