SICE S 60 - ACCESSORIES INCLUDED WITH THE MACHINE; Included Accessories List; SPECIFIED CONDITIONS OF USE; Exclusive Usage

72 User Manual S60
ACCESSORIES INCLUDED WITH THE
MACHINE
-Code219244Rimpliers
The locking grip, when fixed firmly to the rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and keep it in position.
-Code2105954Beadliftinglever
The bead lifting lever keeps the bead in position on the tool when demounting
agricultural wheels.
- Cod.5_122184Setof4stemswithclamp5”
The set of 4 clamp stems is used for rims without cover or that have a diameter greater
than50”.Themaximumoperatingcapacityis60”.
-Code426388sideringlever
SPECIFIED CONDITIONS OF USE
TheS60tyrechangerisdesignedexclusivelyfortyremountinganddemounting.
Any use of the machine other than the described use is to be considered as improper
and unreasonable.
CAUTION!
e manufacturer does not intend the machine to be used for ination operations.
If the operator decides to proceed with partial bead insertion in the tyre on the machine
using his own equipment, a pressure of 0.5 bar must NOT be exceeded (unless the tyre
manufacturer does require lower pressure levels). In any case, the current standards in
force in the country where the tyre changer is used must be observed.
DANGER
It is forbidden to use compressed air or water jets to clean or wash the wheels mounted on
the machine.
CAUTION!
Use only original equipment and accessories.
CAUTION!