SICE S 60 - Rim Locking and Turntable Operation

User Manual S60 77
UK
When locking a rim, continue to operate the command to make sure the maximum
pressure(180bar)hasbeenreached;checkthevalueonthepressuregauge(Cg.11).
CAUTION!
The distributor-turntable pressure tests are performed with the wheel mounted.
CAUTION!
When working, always control the pressure of the turntable
Also check the pressure during tyre mounting and demounting operations; to solve
rim settling problems, continue to operate the locking control.
CAUTION!
The control lever must never be positioned in areas where water can stagnate.
CAUTION!
Any frame oscillation is due to its same length, which increases the tolerances with
the carriage guide.
Oscillationsupto25mm(1”)areallowedanddonotposeproblemstotyrechanger
operation.
ATTENZIONE