SICK C4000 Fusion Ex

b
F
ollow the alignment instructions in the underlying operating instructions.
b
Once the sender and receiver are aligned correctly, secure the components in the
alignment brackets with a torque of 28 to 28.5 Nm.
b
Switch the power supply off and then on again.
b
Check the alignment quality display as described in the underlying operating
instructions to make sure that components are still correctly aligned with one
another.
5 ALIGNIN
G THE SENDER AND RECEIVER
22
O P E R A T I N G I N S T R U C T I O N S | C4000 Fusion Ex 8022867/2019-03-04 | SICK
Subject to change without notice