SICK C4000 Fusion Ex

11 List of figures
1. Mount the safety light curtain in the explosion-proof enclosure.............................11
2. Align the safety light curtain in the explosion-proof enclosure................................11
3. Mounting the two handles......................................................................................... 13
4. The sender and receiver are mounted incorrectly....................................................13
5. Mounting the safety light curtain without the alignment bracket........................... 14
6. Mounting the safety light curtain without the alignment bracket: Step 1.............. 14
7. Mounting the safety light curtain without the alignment bracket: Step 2.............. 15
8. Mounting the safety light curtain without the alignment bracket: Steps 3 and 4..15
9. Mounting the safety light curtain using the alignment brackets.............................16
10. Assembling the alignment brackets.......................................................................... 16
11. Mounting the safety light curtain using the alignment brackets: Steps 1 to 6...... 17
12. Mounting the safety light curtain using the alignment brackets: Step 7................17
13. Mounting the safety light curtain using the alignment brackets: Step 8................18
14. Mounting the safety light curtain using the alignment brackets: Steps 9 and 10.18
15. Mounting the safety light curtain using the alignment brackets: Steps 11 and 12
.....................................................................................................................................
19
16. Rotating with the alignment bracket......................................................................... 21
17. Dimensional drawing, sender and receiver, protective field height 600 mm.........25
18. Dimensional drawing, sender and receiver, protective field height 900 mm.........26
19. Dimensional drawing, sender and receiver, protective field height 1,200 mm......27
20. Dimensional drawing, swivel mount bracket with riser (2074626)........................ 29
21. Dimensional drawing, mounting bracket with riser (2074626).............................. 29
22. Dimensional drawing, alignment bracket (2072525)..............................................30
LIST OF FIGURES 11
8022867/2019-03-04 | SICK O P E R A T I N G I N S T R U C T I O N S | C4000 Fusion Ex
33
Subject to change without notice