SICK C4000 Fusion Ex User Manual

1 About this document
These operating instructions are available to all those who work with the C4000
F
usion Ex safety light curtain.
Please read these operating instructions carefully and make sure that you understand
the content fully before working with the C4000 Fusion Ex safety light curtain.
Scope
T
hese operating instructions only apply to the C4000 Fusion Ex safety light curtain with
one of the following type label entries in the Operating Instructions field:
•
8022832
These operating instructions are only valid in conjunction with the underlying operating
instructions “C4000 Palletizer Standard/Advanced Safety Light Curtain, C4000 Fusion”
(SICK part number 8012249, change index YT69 or newer).
Unless otherwise specified in this document, the information in the underlying operat‐
ing instructions will apply with reference to the C4000 Fusion safety light curtain with‐
out an extension connection and with the respective protective field height and resolu‐
tion.
This document is included with the following SICK part numbers (this document in all
available language versions):
8022832
1 A
BOUT THIS DOCUMENT
4
O P E R A T I N G I N S T R U C T I O N S | C4000 Fusion Ex 8022867/2019-03-04 | SICK
Subject to change without notice

SICK C4000 Fusion Ex Specifications

General

Supply voltage	24 V DC
Enclosure rating	IP65, IP67
Operating Voltage	24 V DC
Protection Rating	IP65, IP67
Resolution	30 mm
Protective field height	300 mm ... 1, 800 mm (depending on the variant)
Synchronization	Optical, cable
Ambient operating temperature	-30 °C ... +55 °C (depending on the variant)
Operating Temperature	-30 °C ... +55 °C (depending on the variant)
Outputs	2 safety outputs (OSSDs), 1 diagnostic output